Triple Eight Halo water helmet offered by BbTALKIN USA. Available in white.
Select the helmet size you require above. They come in XS, Small, Medium, Large or XL. If you are interested in a universal helmet, click here to see our options.
FEATURES:
• Super comfy Sweatsaver Halo Water Liner constructed with three foam layers wrapped in plush fabric
• Velcro removable Sweatsaver Liner Insert providing the option for multiple sizes and easy washing care
• Dual-density closed cell EVA Foam Headliner and Top Crown
• High-density ABS outer shell
• Meets CE EN 1385-2012 Water Sport Standard
Sizing:
XS 20.10 – 20.50 in (51 – 52 cm)
S 20.60 – 21.30 in (52 – 54 cm)
M 21.40 – 22.00 in (54 – 56 cm)
L 22.10 in – 22.90 in (56-58 cm)
XL 23.00 – 24.00 in (58 – 61 cm)
Safety Certification:
CE EN 1385 Water Sports
WARRANTY:
From the date of purchase, this helmet is covered for 6 months. Please see our warranty section for complete warranty details.
• Super comfy Sweatsaver Halo Water Liner constructed with three foam layers wrapped in plush fabric
• Velcro removable Sweatsaver Liner Insert providing the option for multiple sizes and easy washing care
• Dual-density closed cell EVA Foam Headliner and Top Crown
• High-density ABS outer shell
• Meets CE EN 1385-2012 Water Sport Standard
Sizing:
XS 20.10 – 20.50 in (51 – 52 cm)
S 20.60 – 21.30 in (52 – 54 cm)
M 21.40 – 22.00 in (54 – 56 cm)
L 22.10 in – 22.90 in (56-58 cm)
XL 23.00 – 24.00 in (58 – 61 cm)
Safety Certification:
CE EN 1385 Water Sports
Fresh water rinse after each use to avoid corrosion.
HOW TO INSTALL BBTALKIN PRODUCTS ONTO HELMET:
If using in salt water, you must fresh water rinse. Failure to do so can cause corrosion and product failure.
1. Use the alcohol prep to clean up the helmet surface. You must clean the surface of your helmet to insure the 3m tape will adhere to the surface. The 3m tape will not adhere to rubber surfaces. 
2. Attach the helmet speaker pad Velcro tape onto the helmet, left and right side just above the helmet ear opening. 
3. Run your helmet strap through the elastic band on the helmet speaker pad. This is important! Failure to do this step can cause the rubber to rip on your helmet speaker pad. 
4. Install the plastic mount onto the left side of your helmet, just above the helmet speaker pad.
5. Mount the waterproof case into the plastic mount. Make sure both sides of the casing is securely into the mount. 
6. Plug in the 3.5mm audio cable. Make sure the cable is tight and secure. Failure to do so will cause water instruction into the casing. Any water damage to the unit within the casing is not covered under warranty. 
7. Make sure after each use that your case is secure and sealed.
x1: White Triple Eight Halo Water Helmet
x1: Sweatsaver Liner Insert
**Helmet size selected by customer
