Waterproof IPX7
This is a replacement part if you have a head accessory with our boom microphone.
The boom microphone comes on the following head accessories:
B01R: Sports Headset
B01HR: Surf Hat
B01CR: Baseball Cap
You plug the boom microphone’s 3.5mm audio cable directly into your Advance Unit to establish communication. The microphone and speaker piece on the boom microphone are completely waterproof. The design of the boom microphone allows the flexibility to change out either the microphone piece or speaker piece if it becomes damaged over time.
WARRANTY:
From the date of purchase, the boom microphone and all it’s components are covered for 6 months. Please see our warranty section for complete warranty details.
SKU: S07
EAN: 4713309040245
Waterproof Boom Microphone with removable microphone and speaker pieces
- Use fresh water to wash all of the headset.
- Make sure to rinse the microphone and speaker piece.
- DO NOT use high pressure spray.
- It is best to submerge in a bucket of fresh water for a through wash.
- Hang to dry in a well ventilated climate controlled (a/c) environment.
- Over time, the male 3.5 jack on the headset may become corroded. (dull in color) Make sure to keep this clean by a cloth or scotch bright. Do not use any cleaning solution.
If using in salt water, you must fresh water rinse. Failure to do so can cause corrosion and product failure.
B01R: Sports Headset
1. Secure the boom microphone onto the Sports Headset head band. 
2. Plug in the boom microphone’s 3.5mm audio cable. Make sure the cable is tight and secure. Failure to do so will cause water intrusion into the casing. Any water damage to the unit within the casing is not covered under warranty.
B01HR: Surf Hat
1. Secure the boom microphone onto your Surf Hat. 
2. Run the 3.5mm cable through the hole of the Surf Hat. 
3. Plug in the boom microphone’s 3.5mm audio cable. Make sure the cable is tight and secure. Failure to do so will cause water intrusion into the casing. Any water damage to the unit within the casing is not covered under warranty.
B01CR: Baseball Cap
1. Secure the boom microphone onto your Baseball Cap. 
2. Plug in the boom microphone’s 3.5mm audio cable. Make sure the cable is tight and secure. Failure to do so will cause water intrusion into the casing. Any water damage to the unit within the casing is not covered under warranty.
x1: Boom microphone
x1: Foam microphone cover
x1: Velcro fastener for foam microphone cover
x1: Velcro to adhere boom microphone to head accessory
